Price: $9.25

EZ-Poly Particle Wood Repair Kit - Bonds, Fills and Rebuilds Particle Board (3oz. Size)

EZ-Poly Particle Wood Rebuilder is a variable viscosity, two component, construction grade adhesive that can be used as a structural filler and as a sealant.  Ex-Poly is a polymer material that can be worked while curing, unlike any other product!  No VOC's or toxic fumes.  Not flammable.  Even works under water.  Mixed in equal parts by volume.  Painting.  Use plastic compatible paint or plastic primer/shellac before painting.

Uses of EZ Poly Particle Wood Rebuilder:

• Adhesive: Bonds to most wood materials.  Also bonds to metals, ceramics, fiberglass, hard plastics, porcelain and glass.
• Filler: Fills holes, uneven or irregular surfaces, dents and scratches.  Restore rotted or distressed wood, rebuild termite or cutter bee damaged wood.
• Sealant: Provide waterproof and weatherproof seals on non flexing surfaces.

FEATURES and BENEFITS:

• Bonds to any wood and most other materials
• Easy to apply, 1:1 mix ratio by volume
• Extended curing cycle
• Impervious to most acids
• Workable with power tools when cured, i.e. cut, drill, sand, shape, carve, paint or nail without fracturing
• Cures underwater (fresh or salt water)
• Packaged in pre-measured containers to assure proper mixing
• Glues to itself to form a seamless bond
• Low exothermic reaction even when mixed in quantity
• Contains no solvents or volatiles (VOC's)
• No toxic fumes or flammability
• Not D.O.T. regulated

MIXING DIRECTIONS:

Specially designed mixing bag works as it's own applicator.  No mess or mixing bowls or sticks needed.  Simply remove the clip and massage the contents inside the special two-chamber bag by rolling it between both hands.  When the contents are smooth throughout, cut a corner and squeeze EZ-Poly Particle Wood Rebuilder out of the bag.  For most liquidity, apply immediately after mixing

3 EASY STEPS:

1. Remove clip and knead to mix thoroughly
2. Pour into cracks or apply as paste to affected surfaces
3. Finish with sanding or filing within 2 hours

DISCLAIMER. Recommendations for product use are based on tests believed to be reliable. Field conditions vary widely. For this reason, the user must determine product suitability for the particular use and specific method(s) of application. THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING NEGLIGENCE AND/OR STRICT LIABILITY. The foregoing may be altered only by an agreement signed by officers of seller and manufacturer.